Skip to content

cacrowley/cli

 
 

Repository files navigation

Transifex Client

Installation

Installing with a script (Linux/Mac)

You can install the latest Transifex CLI by executing:

curl -o- https://raw.githubusercontent.com/transifex/cli/master/install.sh | bash

Or you can isntall a specific version if you need by executing:

curl -o- https://raw.githubusercontent.com/transifex/cli/master/install.sh | bash -s -- yourVersion

This script will:

  • Try to find the correct version for your system.
  • Download & extract the CLI to the current folder.
  • Check for a profile in one of .profile, .bashrc, .bash_profile, .zshrc and append export PATH="<PWD result>:$PATH", so you can call 'tx' from any path.

Note: You need to restart your terminal for the PATH changes to be applied.

Download from Github Releases (Linux/Mac/Windows)

Another way to install the Transifex CLI is to download the latest version of the binary from GitHub here.

Choose the binary according to your system, download it and unzip it. Copy the binary into the location you want and update the PATH variable of your system if necessary.

The other way to install Transifex CLI in the system is to use the code.

Clone the repository and go into the directory

cd /path/to/transifex/cli

Building from source

The default way to build the binary is

make build

This method requires to have golang in your system. It compiles Transifex CLI and moves it into the ./bin/ directory of the repository.

If you don't have golang installed, but you have Docker enabled, you can use the following command:

make docker-build

This will build the binary and it will copy it at ./bin/ in the repository.

Running from Docker (beta)

You can skip the installation and run the Transifex client from Docker if it is available in your system. All you have to do is put this line:

alias tx='touch ~/.transifexrc; docker run --rm -i -t -v `pwd`:/app -v ~/.transifexrc:/.transifexrc -v /etc/ssl/certs/ca-certificates.crt:/etc/ssl/certs/ca-certificates.crt transifex/txcli --root-config /.transifexrc'

to your ~/.bashrc / ~/.zshrc. (The first time you use it you will have to wait for a ~5MB download)

Running from Github actions (beta)

You can invoke the CLI from within a Github workflow by using our Github action. See the instructions here.

Migrating from older versions of the client

The current version of the client maintains backwards compatibility for the tx push and tx pull commands. So, if you have a CI setup that uses them, you should not have to change anything. However, some things need to be different in the configuration files:

The section headers in .tx/config need to be different to also store the organization slug. So after the migration <project>.<resource> should become o:<org>:p:<proj>:r:<res>. In case something fails during this process, we will provide a message with the failed migrated resource so that you can identify and change the section header manually.

You will be prompted for an API token in case you are using a username/password pair in your ~/.transifexrc file or if you are not using one.

If you are migrating an existing software project from an older version of the Transifex client, you need to run:

tx migrate

This will take care of all the changes and create a back up file of the original config in the same folder as config_yyyymmddhhss.bak before we start the migration process.

Differences With the Previous Version

The two clients have some distinct differences when looking under the hood. The new client is using Go instead of Python

  • for speed and
  • for the ability to produce binary files for multiple platforms.

Additionally, client is using APIv3 instead of APIv2 because

  • it is faster (calls occur asynchronously and you don't have to wait for parsing to finish) and
  • APIv2 is getting deprecated.

Init

The new client's init command creates the .tx folder in the current path, and the config file with the following content which is required for the configuration:

[main]
host=https://app.transifex.com

In case there is already a .tx/config file in the current directory, the users will get a prompt that informs them that, if they proceed, the contents of their .tx/config file will be overridden. A y/n answer, is needed to proceed or abort.

Add

For the previous client, parts of functionality in tx config command adds resources locally.

In the new client, this command is responsible to add a resource in the local config file. Note that it needs all organization, project and resource slugs in order to build the resource id for the APIv3.

It will create a new section in the .tx/config file for a resource like:

[o:org_slug:p:project_slug:r:resource_slug]
...

Push

The differences of the new client, are summarized here:

  • resource IDs, can be accepted without the -r flag
  • when neither -s/-t are set, -s is assumed
  • --all flag creates new languages on Transifex if local files exist for them (on previous client this was the default behavior, now it needs the --all flag)
  • without --all or --languages, the only languages that are considered are the intersection of local and remote languages

Pull

  • resource IDs, can be accepted without the -r flag
  • when neither -s/-t are set, -t is assumed
  • without --all or --languages, the only languages that are considered are the intersection of local and remote languages
  • --json download files (translations) as json files
  • --content_encoding/-e The encoding of the file. This can be one of the following:
    • text (default)
    • base64

Usage

Initialising a Project

The first thing we need to do is run:

tx init

This will simply create an empty .tx/config file to mark the current folder as a Transifex project. Your directory structure should now look like this:

- my_project/
  |
  + .tx/
  |  |
  |  + config
  |
  + locale/
    |
    + en.php

Using Environment Variables

The available environment variables for the CLI:

  • TX_TOKEN: The api token to use
  • TX_HOSTNAME: The API hostname
  • TX_CACERT: Path to CA certificate bundle file

You can either add these variables in your CI settings, your profile file or when executing the commands like: TX_TOKEN=myapitoken tx pull

Adding Resources to Configuration

We will add the php file as a source language file in our local configuration. The simplest way to do this is with tx add which will start an interactive session:

The Transifex Client syncs files between your local directory and Transifex.
The mapping configuration between the two is stored in a file called .tx/config
in your current directory. For more information, visit
https://docs.transifex.com/client/config/.

What is the path of the source file? locale/en.php

Next, we’ll need a path expression pointing to the location of the
translation files (whether they exist yet or not) associated with
the source file. You should include <lang> as a
wildcard for the language code.

What is your path extension? locale/<lang>.php

Use the arrow keys to navigate: ↓ ↑ → ←  and / toggles search
? Which organization will this resource be part of?:
  > Organization 1 (organization-1)
    Organization 2 (organization-2)
    Organization 3 (organization-3)
    Organization 4 (organization-4)
↓   Organization 5 (organization-5)


Use the arrow keys to navigate: ↓ ↑ → ←  and / toggles search
? Which project will this resource be part of?:
  > Project 1 (project-1)

Use the arrow keys to navigate: ↓ ↑ → ←  and / toggles search
? Which is the resource for this file?:
  > en.php (en_php)
    Create a new resource ()

SUCCESS  Your configuration has been saved in '.tx/config'
    You can now push and pull content with 'tx push' and 'tx pull'

Your .tx/config file should look like this:

[main]
host = https://app.transifex.com

[o:organization-1:p:project-1:r:en_php]
source_file = locale/en.php
file_filter = locale/<lang>.php
type = PHP
resource_name = Web Application

You can skip steps from the interactive session by adding flags to the tx add command. In fact, you can skip the interactive session entirely if you provide all the flags:

→ tx add \
    --file-filter=locale/<lang>.php \
    --type=PHP \
    --organization=organization-1 \
    --project=project-1 \
    --resource=en_php \
    --resource-name='Web Application' \
    locale/en.php

Adding resources in bulk

With the old client I could add multiple resources at the same time with tx config mapping-bulk. What should I do now?

We decided not to implement this functionality in the new client because its usage was complicated and it couldn't satisfy every user's need anyway. You can add multiple resources with a relatively simple shell script. For example:

  1. Add every subfolder of a locale folder as a resource:

    for FOLDER in $(ls locale); do
        # Exclusion list
        if echo "excluded_a excluded_b" | grep -w -q $FOLDER; then
            continue
        fi
    
        tx add \
            --organization org \
            --project proj \
            --resource $FOLDER \
            --file-filter "locale/$FOLDER/<lang>.po" \
            --type PO \
            "locale/$FOLDER/en.po"
    done
  2. Add specific folders as resources:

    for FOLDER in $(echo path/to/folder_a path/to/folder_b path/to/folder_c); do
    
        # path/to/folder_a => path_to_folder_a
        RESOURCE_SLUG=$(echo $FOLDER | tr '/' '_')
    
        tx add \
            --organization org \
            --project proj \
            --resource $RESOURCE_SLUG \
            --file-filter "$FOLDER/<lang>.po" \
            --type PO \
            "$FOLDER/en.po"
    done
  3. Turn every .po file into a configured resource:

    for FILEPATH in $(find . -name '*.po'); do
    
        # ./examples/locale/en.po => examples/locale/en.po
        FILEPATH=$(echo $FILEPATH | sed 's/^\.\///')
    
        # examples/locale/en.po => examples_locale
        RESOURCE_SLUG=$(echo $FILEPATH | sed 's/\/[^\/]*$//' | tr '/' '_')
    
        # examples/locale/en.po => examples/locale/<lang>.po
        FILE_FILTER=$(echo $FILEPATH | sed 's/[^\/]*$/<lang>.po/')
    
        tx add \
            --organization org \
            --project proj \
            --resource $RESOURCE_SLUG \
            --file-filter "$FILE_FILTER" \
            --type PO \
            $FILEPATH
    done

Adding remote resources in bulk

If you have content already setup in Transifex, you may want to setup local resources in order to pull the language files on your system. In order to do that, you can run the following command with Linux or Mac OS:

tx add remote \
    --file-filter 'translations/<project_slug>.<resource_slug>/<lang>.<ext>'
    https://app.transifex.com/myorganization/myproject/dashboard/

The use of tx add remote appends the content in the .tx/config file and does not overwrite it. However, if the project and resource exist in the .tx/config file, then it will overwrite the previous information for the specific project & resource.

For Windows OS, please use double quotes instead of single quotes in the following example.

This will create entries in your configuration file for each resource in your remote project. ie the configuration file may look like this:

[main]
host = https://app.transifex.com

[o:myorganization:p:myproject:r:resource1]
file_filter = translations/myproject.resource1/<lang>.po
source_file = translations/myproject.resource1/en.po
type = PO
minimum_perc = 0
resource_name = Resource 1

[o:myorganization:p:myproject:r:resource2]
file_filter = translations/myproject.resource2/<lang>.json
source_file = translations/myproject.resource2/en.json
type = KEYVALUEJSON
minimum_perc = 0
resource_name = Resource 2

[o:myorganization:p:myproject:r:resource3]
file_filter = translations/myproject.resource3/<lang>.html
source_file = translations/myproject.resource3/en.html
type = HTML
minimum_perc = 0
resource_name = Resource 3

The options for this command are:

  • --file-filter: What to use as the file_filter and source_file options in the resulting configuration. This is a pattern that accepts the following parameters:

    • <project_slug>
    • <resource_slug> (required)
    • <lang> (required) - can be used multiple times in the filter path
    • <ext>

    The default value for this option is translations/<project_slug>.<resource_slug>/<lang>.<ext> (the one we showed in our example)

  • --minimum-perc: What to use as the minimum_perc option in the resulting configuration

  • One or more project URLs.

After setting things up, you can pull the source files with tx pull --source.

Pushing Files to Transifex

tx push is used to push language files (usually source language files) from your machine to Transifex. You will most likely want to do that frequently during the lifetime of you project when new source strings are introduced or existing ones are changed. This will make the new strings available to translators as soon as possible.

The simplest invocation of tx push is simply:

→ tx push

This will attempt to push the source file of all local resources that have been configured with tx add.

Limiting resources:

You can limit the resources you want to push with:

→ tx push [RESOURCE_ID]...

A resource ID must refer to a resource that has already been configured with tx add and has the form <project>.<resource>. So, if the URL of your resource in Transifex is https://app.transifex.com/myorganization/myproject/myresource, then the resource ID will be myproject.myresource.

You can also use the * character to select multiple resources with the same pattern. So, for instance, if you have the abc.def resource ID in your configuration, you can select it with either abc.*, *.def, ab*ef or even a*.d*f.

Note: for backwards compatibility with previous versions of the client, you can also use the -r/--resources flag. You can also use both at the same time:

→ tx push p1.r1 p1.r2 -r p1.r3,p1.r4
# Equivalent to
→ tx push p1.r1 p1.r2 p1.r3 p1.r4

tx push will create the resources on Transifex if they are missing.

Language management:

By default, the client will push the source file (the file that's being pointed to by the source_file configuration option from tx add). If you use the -t/--translation flag, tx push will push translation files. This may be desirable if, for example, you previously pulled translation files with the --mode translator option, translated using an offline translation tool and now you want to push your work to Transifex, or if you are migrating from another localization management service to Transifex. If you use both the -t and the -s/--source flags, then you will push both the source file and the translation files.

When you use -t, the client will find all local files that match the file-filter configuration option. The files that are found, and their language codes constitute the local languages. By default, the client will ask the Transifex API for the languages that are supported by the project you are pushing to (the remote languages) and will only push languages that are both local and remote (aka the intersection of local and remote languages).

You can use the -l/--languages flag to handpick which languages you want to push. It only makes sense to include local languages with the -l flag, ie languages for which a file exists according to the file-filter configuration option. The client will then push only the language files you have specified. If you specify local languages that are not yet supported by the remote Transifex project, the client will attempt to add these languages to the project first. Be careful of this since it may affect your pricing if you are a paying customer.

→ tx push -t -l fr,de,pt_BR

The -a/--all flag will attempt to push all local languages to the remote Transifex project, adding them if necessary. Essentially, -a is equivalent to using -l with all the local language codes.

Transifex uses the ISO/IEC 15897 standard for language codes (for example en_US). If you use a different format for the local language codes, you can define a mapping in your configuration file .tx/config. You can specify these mappings for all configured resources by adding them to the [main] section or you can specify mappings per resource. The "per-resource" mappings take precendence. Configuring a language mapping looks like this:

# ...
[o:myorganization:p:myproject:r:myresource]
source-file = ...
# ...
lang_map = pt_PT: pt-pt, pt_BR: pt-br

This means that the remote pt_PT language code maps to the local pt-pt language code and the remote pt_BR language code maps to the local pt-br language code.

The REMOTE_CODE is the language code supported by Transifex. And the LOCAL_CODE is your language code.

The -l flag works with both local and remote language codes.

Skipping pushing older files:

The default behavior of the tx push command is to skip pushing a file when the remote resource on Transifex has had a change more recently than when the local file was last edited. To make sure that the local files are pushed even if they are older than the remote resource, use the -f/--force flag.

You can use the --use-git-timestamps flag to compare against the last time the local files were committed to the local git repository instead of the last modification time in the filesystem. This can be useful in cases where you have just cloned a repository or pulled a branch. In this case, the filesystem modification time will reflect the time you pulled and not the time the file was edited by an actual person. If you use the --use-git-timestamps flag and no information about a local git repository can be found, then the client will fall back to taking the filesystem timestamp into account.

Other flags:

  • --xliff: Push xliff files instead of regular ones. The files must be located in the same place as indicated by the file-filter configuration option, but with the added .xlf suffix (tx pulling with the --xliff option will put xliff files in the correct positions so you will probably not have to do this by hand)

  • --branch: Using this flag, you can access copies of the regular remote resource that are tied to the provided branch. So if tx push proj.res pushes to the https://app.transifex.com/org/proj/res resource, then tx push --branch foo proj.res will push to the https://app.transifex.com/org/proj/foo--res resource. This way you can separate the localization effort across different branches. If you supply an empty string as the branch (--branch ''), then the client will attempt to figure out the currently active branch in the local git repository. For example:

    → git checkout -b new_feature
    → # Edit some source code files# Extract source strings into language file
    → tx push --branch 'new_feature' myproject.myresource
    → # Or
    → tx push --branch '' myproject.myresource

    This way, the "regular" https://app.transifex.com/myorganization/myproject/myresource resource will not be affected by the changes you did to the source strings and the localization effort can be done in parallel on the https://app.transifex.com/myorganization/myproject/new_feature--myresource resource.

    Note: Starting from version 1.5.0 resources created using the --branch flag, will have an enhanced functionality in transifex and will be able to automatically be merged into their bases. Resources created using the --branch prior to this version, need to be pushed again in order for the new functionality to be available.

    → tx push --branch 'new_feature' --base '' myproject.myresource
  • --base: Define the base branch when pushing a branch.

  • --skip: Normally, if an upload fails, the client will abort. This may not be desirable if most uploads are expected to succeed. For example, the reason of the failed upload may be a syntax error in one of the language files. If you set the --skip flag and an upload fails, then the client will simply print a warning and move on to the next language file.

  • --workers/-w (default 5, max 30): The client will push files in parallel to improve speed. The --workers flag sets the number of concurrent uploads possible at any time.

  • --silent: Reduce verbosity of the output.

  • --replace-edited-strings: If present, source strings that have been edited (in the editor UI or via the API) will not be protected from this source file push and will instead be replaced. This can also be set on a per-resource level in the configuration file.

  • --keep-transations: If present, translations of source strings with the same key whose content changes will not be discarded. This can also be set on a per-resource level in the configuration file.

Pulling Files from Transifex

tx pull is used to pull language files (usually translation language files) from Transifex to your machine. Most likely, you will do this regularly when you want to incorporate newly available translations from Transifex into it.

The simplest invocation of tx pull is simply:

→ tx pull

This will attempt to pull the translation files of all local resources that have been configured with tx add.

Limiting resources:

You can limit the resources you want to pull with:

→ tx pull [RESOURCE_ID]...

As stated in the tx push section, a resource ID must refer to a resource that has already been configured with tx add and has the form <project>.<resource>.

You can also use the * character to select multiple resources with the same pattern. So, for instance, if you have the abc.def resource ID in your configuration, you can select it with either abc.*, *.def, ab*ef or even a*.d*f.

Note: for backwards compatibility with previous versions of the client, you can also use the -r/--resources flag. You can also use both at the same time:

→ tx pull p1.r1 p1.r2 -r p1.r3,p1.r4
# Equivalent to
→ tx pull p1.r1 p1.r2 p1.r3 p1.r4

Language management:

By default, the client will pull the translation files of the existing files in the paths that are defined in the file_filter configuration option from tx add.

For instance, if the directory structure looks like this:

- my_project/
  |
  + .tx/
  |  |
  |  + config
  |
  + locale/
    |
    + en.php

and the .tx/config contains:

source_file = locale/en.php
file_filter = locale/<lang>.php

If you use the -s/--source flag, tx pull will pull the source file that is pointed from the source_file option of the config file.

If you use both the -t/--translation and the -s/--source flags, then you will pull both the source file, and the translation files.

Then the client will try to search for any existing language file located at the locale/<lang> path (where <lang> is the language code) and will try to update it, for example locale/el.php, locale/fr.php, etc.

In case that there aren't any translation files, like in the structure above, then you must either use the -l/--language or the -a/--all flag.

Use the -l/--languages flag to handpick which languages you want to pull. It only makes sense to include remote languages with the -l flag, ie languages for which a file does not exist according to the file_filter configuration option. The client will then pull only the language files you have specified:

tx pull -l el,fr,nl

Note: The languages that are defined with the -l/--language flag should belong to the project for the client to download them.

The -a/--all flag will attempt to pull all languages from the remote Transifex project. Essentially, -a is equivalent to using -l with all the project language codes.

As stated before, Transifex uses the ISO/IEC 15897 standard for language codes. If you use a different format for the local language codes, you can define a mapping in your configuration file .tx/config. You can specify these mappings for all configured resources by adding them to the [main] section or you can specify mappings per resource. The "per-resource" mappings take precendence. Configuring a language mapping looks like this:

# ...
[o:myorganization:p:myproject:r:myresource]
source-file = ...
# ...
lang_map = pt_PT: pt-pt, pt_BR: pt-br

This means that the remote pt_PT language code maps to the local pt-pt language code and the remote pt_BR language code maps to the local pt-br language code.

The -l flag works with remote language codes.

Skipping pulling older files:

The default behavior of the tx pull command is to skip pulling a file when a local file on a machine has had a change more recently than when the remote resource was last edited. To make sure that the remote resources are pulled even if they are older than the local files, use the -f/--force flag.

You can use the --use-git-timestamps flag to compare against the last time the local files were committed to the local git repository instead of the last modification time in the filesystem. This can be useful in cases where you have just cloned a repository or pulled a branch. In this case, the filesystem modification time will reflect the time you pulled and not the time the file was edited by an actual person. If you use the --use-git-timestamps flag and no information about a local git repository can be found, then the client will default to taking the filesystem timestamp into account.

Other flags:

  • --xliff: Pull xliff files instead of regular ones. The files will be placed in the same place as indicated by the source-file and file-filter configuration options, but with the added .xlf suffix.

  • --json: Pull translation files as json instead of regular ones. As above, the files will be placed in the same place as indicated by the file-filter configuration options, but with the added .json suffix. Currently, source files are not supporting json format.

  • --disable-overwrite: If a file exists do not update it. This is useful when using -a/--all flag and you don't want to change the existing files but only download other language files.

  • --keep-new-files: Used with --disable-ovewrite to create new files if file already exists locally with a '.new' extension.

  • --mode/-m: The translation mode of the downloaded file. This can be one of the following: 'default', 'reviewed', 'proofread', 'translator', 'untranslated', 'onlytranslated', 'onlyreviewed', 'onlyproofread', 'sourceastranslation' **(default mode is: **'default'). Use like 'tx pull -m proofread' to download only proofread translations.

  • --branch: Using this flag, you can access copies of the regular remote resource that are tied to the provided branch. So if tx pull proj.res pulls from the https://app.transifex.com/org/proj/res resource, then tx pull --branch foo proj.res will pull from the https://app.transifex.com/org/proj/foo--res resource. This way you can separate the localization effort across different branches. If you supply an empty string as the branch (--branch ''), then the client will attempt to figure out the currently active branch in the local git repository. For example:

    → git checkout new_feature
    → # Get updated files for this branch
    → tx pull --branch 'new_feature' myproject.myresource
    → # Or
    → tx pull --branch '' myproject.myresource

    This way, the "regular" https://app.transifex.com/myorganization/myproject/myresource resource will not be affected by the changes one did, and the localization effort can be done in parallel on the https://app.transifex.com/myorganization/myproject/new_feature--myresource resource.

  • --skip: Normally, if a download fails, the client will abort. This may not be desirable if most downloads are expected to succeed. For example, the reason of the failed download may be a syntax error in one of the language files. If you set the --skip flag and an upload fails, then the client will simply print a warning and move on to the next language file.

  • --minimum-perc=MINIMUM_PERC Specify the minimum translation completion threshold required in order for a file to be downloaded.

  • --workers/-w (default 5, max 30): The client will pull files in parallel to improve speed. The --workers flag sets the number of concurrent downloads possible at any time.

  • --pseudo: Generate mock string translations with a ~20% default length increase in characters.

  • --silent: Reduce verbosity of the output.

Removing resources from Transifex

The tx delete command lets you delete a resource that's in your config file and on Transifex.

To delete a resource, use the following command:

tx delete <project_slug>.<resource_slug>

To delete all resources in a specific project at once, instead of referring to a specific resource_slug, you can use the asterisk character as follows:

tx delete project_slug.*
or
tx delete project_slug.\*

Note: for backwards compatibility with previous versions of the client, you can also use the -r/--resources flag. You can also use both at the same time:

tx delete -r <project_slug>.<resource_slug> ....

Other flags:

  • --skip: Normally, if a delete fails, the client will abort. This may not be desirable if most deletes are expected to succeed. For example, the reason of the failed delete may be a a resource that has translated content. If you set the -s/--skip flag and an delete fails, then the client will simply print a warning and move on to the next resource.
  • --force: In case you want to proceed to a deletion even if resources have translations use the -f/--force flag.
  • --branch: In case you want to delete a resource's branch that is on Transifex. If you supply an empty string as the branch (--branch ''), then the client will attempt to figure out the currently active branch in the local git repository.

Merging Resource

The tx merge command lets you merge a branch resource with its base resource (applies only to resources created with the --branch flag)

To merge a resource to its base resource, use the following command:

tx merge --branch branch_name project_slug.resource_slug

Other flags:

  • --conflict-resolution: Set the conflict resolution strategy. Acceptable options are USE_HEAD (changes in the HEAD resource will be used) and USE_BASE (changes in the BASE resource will be used)
  • --force: In case you want to proceed with the merge even if the source strings are diverged, use the -f/--force flag.

Getting the local status of the project

The status command displays the existing configuration in a human readable format. It lists all resources that have been initialized under the local repo/directory and all their associated translation files:

tx status
myproject -> default (1 of 1)
Translation Files:
 - en: po/smolt.pot (source)
 - ar: po/ar.po
 - as: po/as.po
 - bg: po/bg.po
 - bn_IN: po/bn_IN.p
 ...

To get the status of specific resources just add the resources you want in your command:

tx status <project_slug>.<resource_slug> ....

Note: for backwards compatibility with previous versions of the client, you can also use the -r/--resources flag. You can also use both at the same time:

tx status -r <project_slug>.<resource_slug> ....

Updating the CLI app

The tx update command provides a way to self update the application without going to Github releases page.

tx update

Flags:

  • --check: Check if there is a new release. Nothing gets updated.
  • --no-interactive: Proceed to update if there is a newer version without seeing the confirmation prompt.
  • --debug: Enable logging for the binary update process.

License

Licensed under Apache License 2.0, see LICENSE file.

About

The Transifex command-line client

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Go 98.9%
  • Other 1.1%