Docker EveryWhere, dew

We are past 2020! Docker can be used to provide the same working environment across platforms. dew aims at development workflows consisting of Docker containers based on images with the tooling of your requiring. These containers will run from within the current directory and as your current user inside the container. In most cases, this allows for transient environments, as all that is required on the host is a Docker daemon and images that can be garbage collected once done (containers are automatically removed once they have ended).

Running dew increases security by encapsulating only the relevant part of the file system required for a workflow. In addition, it should save you from "dependency hell". You should be able to keep OS installation to a minimal and run most activities from within containers in a transparent way. These containers will have your shell code, your configuration, but all binaries and dependencies will remain in the container and disappear automatically once done.

For the technically inclined, dew is a shortcut to the command below. Actually, the implementation is a bit more complex, but in the same spirit:

docker run \
  -it --rm \
  -v $(pwd):$(pwd) \
  -w $(pwd) \
  -u $(id -u):$(id -g) \
  -v /var/run/docker.sock:/var/run/docker.sock \
  --network host \
  xxx

This script takes some inspiration from lope with the addition of being able to read configurations for known environments. This minimises typing and automates all the necessary command-line options for making a given environment possible. Configurations are simply env files placed: in a sub-directory of the current directory called .dew.d, in a sub-directory of the $XDG_CONFIG_HOME directory, or under the config directory of this repository. To get a list of known configurations, run dew with the -l option.

When $0 -- the main progam -- is a symbolic link to dew, dew will automatically use the basename of the link as the name of the configuration to look for. It will not parse any argument, instead all arguments are passed to the Docker image specified by the configuration that it finds. You can use the environment variables starting with DEW_ if you want to alter options.

Note: This project uses git submodules, use one of the two commands to make sure you have a copy of the submodules. Without the modules, the main script will not even start!

git clone --recursive https://github.com/efrecon/docker-images.git
git submodule update --init --recursive

To catch up with changes, run the following:

git submodule update --init --recursive

Examples

All these examples suppose that you have made dew.sh available from your $PATH. They will also work if you symlink dew to a place where you have this repository installed, and arrange for the dew symlink to be in your $PATH. To make it quicker to type, you probably want to call the symbolic link dew instead of dew.sh.

Busybox

To get a busybox shell in the current working directory, in order to more easily test POSIX compliance of your scripts, or their ability to run in an embedded system, you could run the following command:

dew.sh busybox

This simple command builds upon many of the "good" defaults. It will:

• Give you an interactive ash prompt with the content of the current directory visible. ash is picked up from a list of plausible shells, as one existing in busybox.
• Forbid access to parent directories, or directories elsewhere on the disk. This is a security feature.
• Arrange for the container to run the shell with your user and group ID, so file access, creation and permissions work as expected.
• Automatically forward the values of most of your environment variables to the container.
• Arrange for the container to have a minimal environment mimicing your local environment: there will be a $HOME directory, the same as yours. There will be a user and a group, with the same IDs as yours.

To verify this, assuming that you have a copy of this repository and its submodules at /home/emmanuel/dev/foss/dew you could run the following command from that directory.

./dew.sh busybox find $HOME -type d | grep -v .git

This should output the following. .git information has been removed to keep this output sizeable. You can verify that only the relevant parts of the filesystem have been made available to the container, but also that the container has accessed to the $HOME variable and that it matches your own $HOME on the host.

/home/emmanuel
/home/emmanuel/dev
/home/emmanuel/dev/foss
/home/emmanuel/dev/foss/dew
/home/emmanuel/dev/foss/dew/libexec
/home/emmanuel/dev/foss/dew/libexec/docker-rebase
/home/emmanuel/dev/foss/dew/libexec/docker-rebase/lib
/home/emmanuel/dev/foss/dew/libexec/docker-rebase/lib/mg.sh
/home/emmanuel/dev/foss/dew/libexec/docker-rebase/lib/mg.sh/spec
/home/emmanuel/dev/foss/dew/libexec/docker-rebase/lib/mg.sh/spec/support

Alpine

Running the following command provides more or less the same prompt as above. Note however that, since the default is to run impersonated as yourself, you will end up having an Alpine promt where you cannot install additional software (as you will not be able to sudo).

dew.sh alpine

To run as root, do the following instead:

dew.sh -r alpine

Without being root, and as long as your local user on the host has access to the Docker daemon, you can give yourself access to the host's Docker daemon and see other containers that are running by running the following command:

dew.sh --docker alpine

In practice this will download a version of the Docker client on your local machine, place the client in a sub-directory of the XDG cache (i.e. as specified by $XDG_CACHE_HOME or the default ${HOME}/.cache) and mount the binary into the Alpine Docker container. Go binaries are statically compiled, making this possible across distributions and libc implementations. In addition, dew will have arranged for the impersonated user within the container to be a member of the docker group, under the same ID as the local docker group as associated to the UNIX domain socket at /var/run/docker.sock.

From within the Alpine container, the following command will therefore work as expected and show all running containers on the host. One of these containers will be your container. It will have been automatically be named to dew_alpine_ followed by the PID of the dew process at the time of its creation. You should even be able to kill yourself by removing the container with the Docker CLI!

docker ps

If you run the command from the root directory of this repository, you can even start yet another dew environment from the prompt within the first dew container. In other words, from the Alpine prompt in the container, running the following command will open yet another clean environment in another container. To verify this, you should see that running dew.sh downloads a new copy of the Docker client, as it does not exist in the cache from within the first container.

dew.sh --docker alpine

Python

To get an interactive python, you could run the following command:

dew.sh python

Setting up python uses a specific environment configuration file. It specifies a number of variables that will be used by dew when creating the container. In practice, this sets the shell to use for the environment to -, which is understood by dew as running the default python image from the Docker hub, but as your regular user.

Node

To get a bash prompt where you can run both npm and node, run the following command. The entrypoint for the node image is node, but the default for dew when running with impersonation is to inject its own su.sh script as an entrypoint. The script will ensure a minimal HOME environment for a user named after yours. This is why the following command provides a bash prompt, rather than a node prompt. In that specific case, you might also notice that you might become the user called node (and not your username). This is because the default Docker node image already has a user at uid 1000 with the name node.

dew.sh node

If you instead want to get an interactive node prompt, run the following. This suppresses injection of su.sh as described above, reverting to the regular behaviour.

dew.sh -s - node

Tcl

In the same vein, getting an interactive Tcl prompt is as easy as running the following command.

dew.sh tclsh

This uses a slightly more advanced environment configuration file. The configuration arranges for a user-level specific entrypoint to be injected into the container and used as the shell. The purpose of this is to be able to provide the user with a .tclshrc file in its $HOME directory. The .tclshrc is picked from its default location in the image and arranges for a readline-capable Tcl prompt with a coloured prompt.

Kubernetes

To operate against a Kubernetes cluster, you could run a command similar to the following one. The command uses yet another configuration file, this time with the main goal of passing your $HOME/.kube/config file to the container.

dew.sh kubectl get pods --all-namespaces

lazydocker

To run lazydocker to analyse what is currently running at your local Docker daemon, run the following command:

dew.sh --docker --root --shell - lazyteam/lazydocker

As this is almost too long, even when using the short options, there is a ready-made configuration for lazydocker. The configuration arranges to run under your account with impersonation and for configuration settings to be saved at their standard location in your $HOME directory. This requires rebasing the image on top of busybox:latest. Instead of the longer command above, you should be able to run:

dew.sh lazydocker

Command-Line Options

dew offers a number of command-line options, possibly followed by a double-dash -- to mark the end of the options, followed by the name of a Docker image (or the name of a tailored environment found under the configuration path), followed by arguments that will be passed to the Docker container at its creation (the COMMAND from a Dockerfile). Pass the option --help to get a list of known options.

Provided the first argument after the (optional) -- is XXX, it will be understood as follows:

• If a file called Dockerfile.XXX, or XXX.Dockerfile, or XXX.df is found under the configuration path DEW_CONFIG_PATH, that file will be used to build a local Docker image called github.com/efrecon/dew/XXX -- the prefix is actually controlled by DEW_NAMESPACE. dew will rebuild a new image only whenever a change has been detected on the Dockerfile.
• If a file called XXX or XXX.env is found under the configuration path DEW_CONFIG_PATH, that file will be used to set any of the environment variables described below. Note that it is possible to combine this behaviour with the Dockerfile behaviour above.
• If none of the above was true, XXX is understood as the name of a local or remote Docker image.

Environment Variables

dew can also be configured using environment variables, these start with DEW_. Command-line options, when specified, have precedence over the variables. Apart from empty-lines and comments, the DEW_-led variables are the only variables that can be set in the environment configuration files found under the configuration path.

DEW_CONFIG_PATH

This variable is a colon separated list of directories where dew will look for environment configuration files, i.e. files which basename matches the first command-line argument after all the options, or Dockerfiles. The default for the configuration path is the directory dew under $XDG_CONFIG_HOME, followed by the config directory under this repository. When XDG_CONFIG_HOME does not exist, it defaults to $HOME/.config.

DEW_SOCK

This variable contains the location of the Docker UNIX domain socket that will be passed to the container created by dew. The default is to pass the socket at /var/run/docker.sock. When the value of this variable is empty, the socket will not be passed to the container. Note that this is not the same as the DEW_DOCKER variable. Both need to be set if you want a Docker CLI in your container.

DEW_BLACKLIST

This variable is a comma-separated list of environment variables that will not be passed to the container where impersonation is turned on (see DEW_IMPERSONATE). The default is SSH_AUTH_SOCK,TMPDIR,PATH.

DEW_IMPERSONATE

This variable is a type or a boolean. When set to 1, the default, impersonation will happen, i.e. the process or interactive prompt inside the container will run under a user with the same user and group identifiers as the ones of the calling user. In addition, in interactive containers, the user inside the container will be given the same HOME directory as the original user, albeit empty (except perhaps for the current path, see DEW_MOUNT). Impersonation works by running the container as root, but injecting an impersonation script that will setup a minimal environment inside the container before becoming to relevant user and group.

When the variable is set to minimal, minimal impersonation will happen instead. This means that the identifier of the first regular user present inside the image will be used for impersonation. The container is then run using the --user option, but fixuid is injected and used to arrange for proper access rights for files.

DEW_INTERACTIVE

This variable is a boolean. When set to 1, the default, interaction will be enabled within the container. In practice, this means that the Docker run command will use the options -it -a stdin -a stdout -a stderr. It is possible to turn this off, but re-adding a single -i through the DEW_OPTS variable for proper pipe support. See bat for an example.

DEW_DOCKER

This variable is a boolean. When set to 1, a version of the Docker client should be injected into the destination container. The default is 0, i.e. no Docker CLI available. Note that you need DEW_SOCK to point to the UNIX domain socket to arrange for the Docker CLI client in the container to be able to access the host's Docker daemon. When impersonating, user inside the container will be made a member of the docker group in order to have the proper permissions.

DEW_MOUNT

This variable expresses the number of levels up the directory hierarchy, starting from the current one, should be mounted into the container. A negative number turns off the function entirely. When positive, the working directory in the container maps to the current directory. Setting this to strictly positive values will facilitate accessing (development) files upwards in the tree. In other words:

• Setting DEW_MOUNT to 0 (the default) mounts the current directory inside the container and makes it the working directory.
• Setting DEW_MOUNT to 1 mounts the parent of the current directory inside the container, and makes the current directory the working directory. This enables the container to access all files and directories contained in the parent directory.

DEW_OPTS

The content of this variable is blindly passed to the docker run command when the container is created. It can be used to pass further files or directories to the container, e.g. the k8s configuration file, or an rc file.

Note that in the content of this variable, any string named after one of the documented variables, but surrounded by %, e.g. %DEW_SHELL%, will be replaced by the value of that variable.

DEW_SHELL

This variable can contain the path to a shell that will be run for interactive commands. The default is to have an empty value, which will look for the following possible shells in the container, in that order: bash, ash, sh.

DEW_DOCKER_VERSION

This variable is the version of the Docker client to download and inject in the container when running with the -d (--docker) command-line option, or when the DEW_DOCKER variable is set to 1. When empty, the default, the latest version of the Docker client will be downloaded. Check for new versions only happen every DEW_BINCACHE_VERCHECK seconds.

DEW_INSTALLDIR

This variable is the directory where to install binaries inside the container. This defaults to /usr/local/bin, a directory which is part of the default PATH of most distributions.

DEW_REBASE

This variable will rebase the main image passed as the first argument on top of the image given to the option. This can be handy when running with slimmed down images that only contain relevant binaries, and when you, for example, desire a shell and related utilities at an interactive prompt in such an image. Rebasing will generate a new image, and this will happen once and only once per pair of images.

DEW_XDG

When the value of this variable is not empty, dew will create 4 directories under the XDG standard directories, named after the value of that variable (i.e. sub-directories of $XDG_DATA_HOME, $XDG_CONFIG_HOME, $XDG_STATE_HOME and $XDG_CACHE_HOME). Each directory that was successfully created, will be mounted into the container for read and write. Using sub-directories is compatible with most tools and enforces configuration isolation as the binaries running in the container will not be able to read any other XDG configuration files than the selected ones.

DEW_PATHS

This variable should contain a space-separated list of path specifications. These specifications will point to files and/or directories that will be created before the container is created. This can be used in addition to the DEW_XDG variable for hidden setting files and similar. Path specifications should contain the following items, separated by the colon : sign:

• The path to the file or directory to create (mandatory)
• The type of the path: f or - for a file, d for a directory. When empty, the default, a file will be created through touch.
• A template (file or directory) to initialise the content of the file or directory. In this specification % enclosed variable names will be replaced by their content.
• The access specification for the path, compatible with the chmod command, e.g. 0700 or ug+rw. When empty, the default, no chmod will be performed and the file or directory will be created with the user account's default mask.
• The owner of the file (a name or an integer). When empty, the default, the owner will not be changed and be the user running the script.
• The group owner of the file (a name or an integer). When empty, the default, the group will not be changed and be the one of the user running the script.

DEW_RUNTIME

This variable should contain the name of a runtime client able to create OCI containers using the docker CLI command-line options. By default, this is an empty string, in which case the first existing client out of the list contained in the DEW_RUNTIMES (note the terminating S) will be picked. docker is first in this list for backwards compatibility.

DEW_INJECT

This variable implements a single RUN command from a Dockerfile on the cheap. The command that it contains will be first used as the entrypoint on the image pointed at by the DEW_IMAGE variable (or corresponding command-line option). Once done, a snapshot of the resulting container will be stored in a local image, using a tag that uniquely depends on the content of the command. Then, everything will proceed as described in this manual, but using the new image. Image generation will only happen if the content of the command changes. When the command is a valid (local) path, its content will be used instead.

Note that in the content of this variable, any string named after one of the documented variables, but surrounded by %, e.g. %DEW_SHELL%, will be replaced by the value of that variable.

DEW_INJECT_ARGS

This variable contains arguments that are blindly passed to the injected command at the time of image creation. This facilitates the reuse of the same injected command, with varying arguments. You could, for example, reuse a command that performs generic package installation and give it varying packages for the implementation of a container.

Note that in the content of this variable, any string named after one of the documented variables, but surrounded by %, e.g. %DEW_SHELL%, will be replaced by the value of that variable.

DEW_FEATURES

This variable should contain a space separated list of features that each container will be provided with. Features are keywords in uppercase and their definition comes from the file pointed at by the DEW_FEATURES_CONFIG variable. Features are the combination of one or several options and flags to the run command of docker or any other supported container runtime.

DEW_FEATURES_CONFIG

This variable points to a file in .env format and containing the definition of each recognised feature that can be provided as a keyword in the DEW_FEATURES variable. The default location for this file is inside the etc subdirectory of the main repository.

DEW_BINCACHE_VERCHECK

When versions of binary dependencies are checked, i.e. whenever the specified versions for these binaries are empty, dew will only check if a new version is available every DEW_BINCACHE_VERCHECK seconds. The default is 3 days.

DEW_BINCACHE_EXPIRE

dew keeps versions of binary dependencies in the XDG cache. DEW_BINCACHE_EXPIRE is the number of seconds after which old binaries are evicted from the cache. The default is 41 days.

Variables Accessible to Resolution

The variables accessible are all the variables starting with DEW_ and described in the section [above][#environment-variables]. In addition, it is possible to use, when relevant:

• DEW_CONFIGDIR: The directory hosting the .env configuration file.
• DEW_ROOTDIR: The directory hosting the main dew.sh script (resolved).

Implementation

In many cases, this script goes a few steps further than the docker run command highlighted in the introduction.

First of all, in encapsulates all processes running in the container around tini using the --init command-line option of the Docker run sub-command. This facilitates signal handling and ensures that all sub-processes will properly terminate without waiting times.

Second, it pushes timezone information from the host into the container for accurate time readings.

Third, and most importantly, dew will often not directly add the --user option to the run subcommand, but still ensures that the process(es) is/are run under your user and group. To this end, dew injects a su-encapsulating script into the container and arranges for that script to be run as the entrypoint. The script will perform book-keeping operations such as creating a matching user and group in the "OS" of the container, including a home at the same location as yours. The script will also ensure that your user inside the container is a member of the docker group to facilitate access to the mounted Docker socket. Once all book-keeping operations have been performed, the script becomes "you" inside the container and execute all relevant processes under that user with su.

Encapsulated behind the main su, processes should see an empty (but existing!) $HOME, apart from the current directory where the dew container was started from. That directory will be populated with all files accessible under that part of the filesystem tree. Some tools require more files to be accessible for proper operation (configuration files, etc.). In that case, you should be able to add necessary files through passing additional mounting options to the docker run subcommand, e.g. kubectl or lazydocker. The su-encapsulating script requires a number of common Linux utilities to be present in the target container. When running with slimmed down images, you can make sure to provide such an environment through the --rebase option or its equivalent DEW_REBASE variable.

It is possible to make use of the --user option of the run subcommand when setting the DEW_IMPERSONATE variable to minimal. In that case, the su script will not be injected.

Requirements

dew has minimal requirements and is implemented in pure POSIX shell for maximum compatibility across platforms and operating systems. dew only uses the command-line options of sed, grep etc. that available under their busybox implementation. When creating users and groups, su.sh tries to use the tools available in the base OS used by the container. Finally, when rebasing is necessary, rebase.sh will require jq to be installed on the host system.

History and Breaking Changes

For a short time period, dew supported a DEW_NETWORK environment variable (and corresponding --network option). This has been removed in favour of the DEW_FEATURES environment variable.